CM5-30 & CM5-60 Charging Generators
The CM-5 charging generator are available in 30kV & 60kV versions for more demanding static bonding and charging applications.
- Static Bonding
The Simco CM-50 static charging generator sets a new standard, with microprocessor control to give market leading features and performance.
Two new features Voltage control (VC) and Advanced Current Control (CC) allow the generator to give a stable output depending on the user requirements. Typically, static generators provide an output voltage, which will alter depending on environmental factors.
Advanced Current Control enables the generator to monitor the supplied current to the electrode or charging bar. If the load is too high, such as when material is missing between the bar and grounded roller, the generator detects this and switches the current to a safe low level. This prevents arcing, emitter pin wear and ultimately charging bar failure. When a material is reinserted, the current will automatically switch back to the required level.
Voltage Control will make internal adjustments to ensure, wherever possible, the output voltage remains at the setpoint level. Differing material types and changes in humidity will not affect the output voltage. This will give consistency and remove the need for operators to constantly make small changes to the output voltage.
Advanced Output Control is another option available for specific applications. This function provides output control that is proportional to an input signal e.g. the level of charging can be proportional to the speed of your machine.
In addition to the standard Sub D-25pin I/O connector, an interface can be fitted allowing the generator to communicate through serial bus interfaces such as Profibus or CANopen (Other serial protocol available on request).
CM5 is fully backwards compatible with ECM30/60 and ECM DI30/60.
- Output voltage of 0-30 kV DC (CM5-30)
- Output voltage of 0-60 kV DC (CM5-60)
- 2 versions with a positive or negative output voltage
- Voltage Control and Current Control
- Password protected menu, lockable keyboard
- 4-line LCD display with dual instructions (text + symbols)
- Analogue remote-control functions and signals
- Quick setup
- Advanced Current Control (patented)
- Advanced Output Control
- Serial bus interface optional
- 180 ° reversible control panel equipped with membrane switches
Housing material: Steel, powder coating
Weight: 8.2 kg
Connections: 4 I/O: Sub-D 25 p
High voltage reading: LCD display
Cable: 2.5 m with plug and Euro Connecter IEC-320
Ambient temperature: 0 - 55 °C
Use circumstances: Industrial
U primary: 100-240 V AC
Frequency: 50 - 60 Hz
Power consumption: 240 Watt max.
U secondary: 0 - 60 kV DC
I secondary: 0 - 2.5 mA
Polarity: Pos. or neg.
Limit indication: Yes
Options: Serial bus interface